Now when it comes to cleaning the fiberglass wall Lamination Adhesive , if you get any latex adhesive on the face of the FRP clean it with clean water. Just have a bucket and a sponge with clean water and clean the FRP panel off immediately.

So if you put up one fiberglass wall panel and you see a little glue on it, take the glue off right then and there. If you wait until after the project is done to come back and clean, that glue is dried like a rock and now you're back taking it off with a hammer and chisel.

What is a great, fast glue?

The High Performance Spray Adhesive has a lot of benefits and is the answer to anyone who needs a great spray adhesive that does a quick and clean job. High Performance Spray Adhesive is a thick mist spray adhesive that dries clear and adheres extremely well, permanently bonding surfaces.

It is also resistant to water and humidity. This high performance spray adhesive won't bleed through, curl or wrinkle paper and can be used in a large variety of car and home uses, such as mounting pictures, fabrics, and cardboard, wood that is lightweight and other board material such as foam, foil and corkboard.

High Performance Super Adhesive It comes in a 11 ounce spray can that can be applied between 65 and 95 degree temperatures. Simply hold the can vertically and spray 8" to 10" away from your item. Continue spraying in an even and continuous motion to avoid a buildup of spray in one place.